Filament Winding Technology
GRP Tanks
Produced with Hoop, Helical and Polar winding techniques; seamless, monolithic industrial tanks. Leak-tightness guaranteed solutions for the food, chemical and refining industries.
View DetailsFRP Tanks
Process Chemistry and Mass Transfer Engineering
Gas Washing Towers (Scrubber)
High Efficiency in Industrial Emission Control
1 / 8
2 / 8
3 / 8
4 / 8
5 / 8
6 / 8
7 / 8
8 / 8
Gas Washing Towers (Scrubber)
Process Chemistry and Mass Transfer Engineering
Metal plating is a basic environmental protection technology that neutralizes acidic, basic or toxic gases that are prohibited to be released into the atmosphere in the chemical, mining and energy production sectors by transferring them from the gas phase to the liquid phase. Over 99% gas retention efficiency is achieved by simultaneous operation of absorption, chemical neutralization and particle retention mechanisms.
The main purpose of scrubber systems is to maximize the contact surface area between the dirty gas stream and the washing liquid (absorbent). The transition of gases such as SO₂, HCl, NH₃, Cl₂ to the liquid phase is governed by Henry's Law and diffusion principles.
Technical Advantages
- Packed Tower Design: High surface area/volume ratio with counter current system, Raschig/Pall rings or saddle type fillers.
- Venturi Scrubber Option: Ideal system for gases with high particle and dust loads, atomizing the washing liquid with a gas speed of 60-120 m/s.
- Spray Tower: An alternative with low pressure loss for pre-washing or hot gas cooling (quench) without the risk of clogging in very high dust loads.
- PVDF/PP Material Technology: Polypropylene (PP) up to 80-90°C, PVDF up to 140°C and excellent resistance to aggressive oxidizing environments (chlorine gas, chromic acid).
- Automatic pH/ORP Dosing: Sensors detecting the saturation of the circulation liquid, automatic caustic/acid dispensing system.
- Blowdown Control: Automatic wastewater discharge that prevents dissolved salt crystallization and nozzle clogging with a conductivity sensor.
- Mist Eliminator: Special mesh structures that prevent liquid droplets from escaping into the atmosphere during gas release.
- Modular Design: Flexible configuration suitable for capacity increase in facility expansion.
Our Product Range
Our Product Portfolio
Continuous Drawing and Molding Technology
Pultrusion Profiles
A total of 8 pultrusion lines in our factory, all processes including electricity, ventilation and cutting systems, have been completed and are ready for full capacity production. I-beams, U-channels, angle irons, pipes and special cross-section structural profiles are produced in accordance with EN 13706 standards.
View Details
75 Meters Continuous Plate Line
Flat Sheets and Panels (Fibropan)
GRP (Glass Fiber Reinforced Polyester) based Fibropan roof and facade sheets are produced in our 75 meter long single piece sheet line in our factory. Thanks to uninterrupted production technology, we offer industrial panels in transparent or opaque form in the desired length.
View DetailsGet a Quote
Get a Quote for Gas Washing Towers (Scrubber)
Share the details of your project and our engineers will offer you the most suitable solution.